600 mesh twill weave stainless steel wire mesh

600 mesh twill weave stainless steel wire mesh

Standard

GB/T 5330.1-2000,  GB/T 19628.2-2005

Anping Web Wire Mesh Co.,LTD Twill Weave Process and Technical Parameter

Brief description of 600 mesh twill weave stainless steel wire mesh

600 mesh twill weave stainless steel wire mesh including 600 wires and openings of 1 inch Using 0.018mm diameter wire, by twill weaving, woven 600 mesh opening for 0.024mm liquid or gas filter. This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better

Material

300 series: 316L

600 mesh twill weave stainless steel wire mesh technical parameter

roll width: 1.0-1.3m

roll length: 30m

600 mesh twill weave stainless steel wire mesh application

Sieves

Filters

Laboratories

Injection Powders

Dusts Selection

Screening Chemical Additives

Oil Fine Filter

Gas Flow Control

600 mesh twill weave stainless steel wire mesh packing

Stainless steel wire mesh is packed in rolls,winding on a paper tube,wrapped in moisture-proof paper

or plastic film, outside wooden cases or wooden pallet.