500 mesh twill weave stainless steel wire mesh

500 mesh twill weave stainless steel wire mesh

Standard

GB/T 5330.1-2000,  GB/T 19628.2-2005

Anping Web Wire Mesh Co.,LTD Twill Weave Process and Technical Parameter

Brief description of 500 mesh twill weave stainless steel wire mesh

500 mesh twill weave stainless steel wire mesh including 500 wires and openings of 1 inch Using 0.025mm diameter wire, by twill weaving, woven 500 mesh opening for 0.025mm liquid or gas filter . This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better

Material

300 series: 316L

A low-carbon version of 316. It provides better wire flexibility for weaving and eliminates the risk of intergranular corrosion after welding.

500 mesh twill weave stainless steel wire mesh technical parameter

roll width: 1.0-1.3m

roll length: 30m

500 mesh twill weave stainless steel wire mesh application

Laboratories and filters: test sieves, screening and filtering , laboratory screening media, particle sizing screens,shale shaker screen,dusts selection, screening chemical additives

Capillary wicking for rebuildable atomizers : mesh wicking material, vaping mesh sheets, rebuildable atomizer mesh wicks, electronic cigarette atomizer mesh inserts

Oil Purification & gas flow control: oil fine filter, gas flow control, fine oil filtration discs, hydraulic micro-filters, flow gas diffuser screens,fuel filter discs

Pharmaceutical drug preparation:pharmaceutical powder preparation,pharmaceutical ingredient sifters

500 mesh twill weave stainless steel wire mesh packing

Stainless steel wire mesh is packed in rolls,winding on a paper tube,wrapped in moisture-proof paper

or plastic film, outside wooden cases or wooden pallet.