
Mesh: 30X30mesh
Wire Dia: 0.12-0.35mm
Aperture: 0.4-0.7mm
Material: 201,202,301,302,304,304L,316,316L,321,430
Weave Type: plain weave
Roll Width: 1.0m,1.2m,1.5m,1.8m,2m,3m,4m,5m,6m,7m,8m
Roll Length: 30m
Application: Sifting powders,Filters, seiving or screening,Biodiesel oil filter,Tea strainer,Decorative/cosmetic mesh,Food use
30 mesh plain weave stainless steel wire mesh
Standard
GB/T 5330.1-2000, GB/T 19628.2-2005
Anping Web Wire Mesh Co.,LTD Plain Weave Process and Technical Parameter
Brief description of 30 mesh plain weave stainless steel wire mesh
30 mesh plain weave stainless steel wire mesh including 30 wires and openings of 1 inch Using 0.12-0.35mm diameter wire, by plain weaving, woven 30 mesh opening for 0.4-0.7mm solid particles , it can also be used as a liquid or gas fine filter material . This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better
Material
200 series : 201 202 205
300 series : 301 302 304 304L 309 309S 310 310S 316 316L 321
400 series : 410 420 430
Common Grade
Characteristics
304
The standard "18-8" alloy (18% Cr, 8% Ni) for woven wire cloth. It resists outdoor rusting and high-temperature oxidation up to 800°C. Widely used for general industrial, commercial, and domestic mesh.
304L
A low-carbon version of 304. The lower carbon content makes the wire softer for easier weaving and significantly improves its welding characteristics.
316
Offers superior resistance to pitting corrosion from chlorides, brines, and halogens compared to 304. It features high creep strength at high temperatures and excellent durability at sub-zero temperatures. Widely used for chemical processing mesh.
316L
A low-carbon version of 316. It provides better wire flexibility for weaving and eliminates the risk of intergranular corrosion after welding.
321
A titanium-stabilized version of 304. It resists intergranular corrosion and maintains higher strength at extreme temperatures where 304 or 304L would fail. Welded 321 should not be used in highly oxidizing environments.
30 mesh plain weave stainless steel wire mesh technical parameter


roll width: 1.0-8.0m
roll length: 30m
30 mesh plain weave stainless steel wire mesh application
Food and beverage : tea strainer, coffee filter, kettle filter, homebrew mash filter / hop stopper, sifting powders, fine ground black pepper, table salt, fried chicken powder, cornstarch, almond flour, grains and cereals sieving
Plastic and polymer industry: extruder screens, filter discs,polymer melt extruder screen packs
Filtration : biodiesel oil filter,lubrication oil filter packs,slurry de-watering micro-strainer discs
EMI/RFI shielding:shielding mesh, EMI and RFI shielding, RF attenuation screens, Faraday cage, electronic enclosure signal suppression cloth,server room ventilation shielding panels,military shelter signal isolation grilles ,radio and micro-wave screening
30 mesh plain weave stainless steel wire mesh packing
Stainless steel wire mesh is packed in rolls,winding on a paper tube,wrapped in moisture-proof paper
or plastic film, outside wooden cases or wooden pallet.
Support:NINEWIN INTERACTION