30 mesh brass wire mesh

30 mesh plain weave brass wire mesh

Standard

GB/T 5330.1-2000,  GB/T 19628.2-2005

Anping Web Wire Mesh Co.,LTD Plain Weave Process and Technical Parameter

Brief description of 30 mesh plain weave brass wire mesh

30 mesh plain weave brass wire mesh including 30 wires and openings of 1 inch Using 0.12-0.27mm diameter wire, by plain weaving, woven 30 mesh opening for 0.57-0.72mm solid particles , it can also be used as a liquid, gas filter support material or protective fabrics to use. This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better.

Material

CuZn40 CuZn37 CuZn35 CuZn30 CuZn20 CuZn5

30 mesh plain weave brass wire mesh technical parameter

roll width: 0.914m, 1.0m, 1.22m

roll length: 30m

30 mesh plain weave brass wire mesh application

Chemical Filtration

Fiber Spinning Mesh

Shielding Mesh

Decorative Mesh

Filters

Test sieves

30 mesh plain weave brass wire mesh packing

Brass wire mesh is packed in rolls,winding on a paper tube,wrapped in moisture-proof paper or plastic film,

outside wooden cases or wooden pallet.