60 mesh plain weave stainless steel wire mesh

60 mesh plain weave stainless steel wire mesh

Standard

GB/T 5330.1-2000,  GB/T 19628.2-2005

Anping Web Wire Mesh Co.,LTD Plain Weave Process and Technical Parameter

Brief description of 60 mesh plain weave stainless steel wire mesh

60 mesh plain weave stainless steel wire mesh including 60 wires and openings of 1 inch Using 0.12-0.23mm diameter wire, by plain weaving, woven 60 mesh opening for 0.1-0.3mm solid particles , it can also be used as a liquid or gas fine filter material.. This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better

Material

200 series : 201 202 205

300 series : 301 302 304 304L 309 309S 310 310S 316 316L 321

400 series : 410 420 430

60 mesh plain weave stainless steel wire mesh technical parameter

roll width: 1.0-8.0m

roll length: 30m

60 mesh plain weave stainless steel wire mesh application

Laboratories and Filters

Sifting Powders

Process Screening and Sieving

Hydraulic Filters

Plastic Extrusion

Papermaking

Decorative/Cosmetic Mesh

Food Use

Shielding

Plastic Extrusion Particles Mesh

Chemical Filler

60 mesh plain weave stainless steel wire mesh packing

Stainless steel wire mesh is packed in rolls,winding on a paper tube,wrapped in moisture-proof paper

or plastic film, outside wooden cases or wooden pallet.