18 mesh plain weave stainless steel wire mesh

18 mesh plain weave stainless steel wire mesh

Standard

GB/T 5330.1-2000,  GB/T 19628.2-2005

Anping Web Wire Mesh Co.,LTD Plain Weave Process and Technical Parameter

Brief description of 18 mesh plain weave stainless steel wire mesh

18 mesh plain weave stainless steel wire mesh including 18 wires and openings of 1 inch Using 0.15-0.50mm diameter wire, by plain weaving, woven 18 mesh opening for 0.9-1.2mm solid particles , it can also be used as a liquid, gas coarse filter support material or protective fabrics to use. This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better

Material

200 series : 201 202 205

300 series : 301 302 304 304L 309 309S 310 310S 316 316L 321

400 series : 410 420 430

18 mesh plain weave stainless steel wire mesh technical parameter

roll width: 1.0-8.0m

roll length: 30m

18 mesh plain weave stainless steel wire mesh application

Sifting Powders

Sieves

Coffee Filter

Fly Screen

High Flow Coarse Air Filter

Shale Shaker Screen

Sand Sieve

Filtration Support Material

Rangehood Filter

Speakers Cover

Microphones Cover

Shielding

Door and Window Protection

Test sieve

Quartz Sand Sieve

18 mesh plain weave stainless steel wire mesh packing

Stainless steel wire mesh is packed in rolls,winding on a paper tube,wrapped in moisture-proof paper

or plastic film, outside wooden cases or wooden pallet.