Conical Strainers are very easy to install and remove between two flanges in a pipeline system. They are used in many fluid, steam and gas applications like:

A startup strainer, also known as conical strainer, is installed in a system to remove unwanted debris from the process stream. It can be installed to protect a flow

Perforated Conical Strainers represent a substantial performance improvement over flat  strainers. It has more open area so conical strainers clog more s

When choosing a perforated metal, wire mesh, or mesh/perforated combination, it should be ensure overstraining does not occur. As a general rule the specified level

Conical strainers are preferably used. The cone is a perforated metal lined by a wire mesh ( fine or coarse). 1) Fine mesh: Wire mesh from 60mesh to 300mesh 2) Coar

Conical strainers are used perfectly for the protection of pipeline. The protection cost is generally more expensive than the total cost for a strainer installation.  Con

1) Quantity 2) Line Size 3) Mating Flange Rating 4) Flange face type 5) Type of Strainer Required 6) Length Required 7) Mat

Conical strainers are passive items that will prevent the onward movement of dirt and debris which is larger than the holes in the mesh. The pressure drop across the

First: Check materials, pressure and temperature and their maximum values. Second : Determine the correct installation situation and the direction of fluid flow.

Introduction Conical strainers are not intended to be used for permanent applications, it can be also called temporary strainers. Temporary strainers h