200 mesh brass wire mesh

200 mesh plain weave brass wire mesh

Standard

GB/T 5330.1-2000,  GB/T 19628.2-2005

Anping Web Wire Mesh Co.,LTD Plain Weave Process and Technical Parameter

Brief description of 200 mesh plain weave brass wire mesh

200 mesh plain weave brass wire mesh including 200 wires and openings of 1 inch Using 0.05mm diameter wire, by plain weaving, woven 200 mesh opening for 0.07mm solid particles , it can also be used as a liquid, gas filter support material or protective fabrics to use. This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better.

Material

CuZn40 CuZn37 CuZn35 CuZn30 CuZn20 CuZn5

200 mesh plain weave brass wire mesh technical parameter

roll width: 0.914m, 1.0m, 1.22m

roll length: 30m

200 mesh plain weave brass wire mesh application

Engine Oil Filter

Chemical Filtration

Printing Mesh

Filter Discs

Test Sieves

200 mesh plain weave brass wire mesh packing

Brass wire mesh is packed in rolls,winding on a paper tube,wrapped in moisture-proof paper or plastic film,

outside wooden cases or wooden pallet.